袖珍740SRM表面電阻檢測器用於快速和可重複的測量導電、防靜電及絕緣表面的電阻率
* 740測量表面電阻率和接地電阻。
* 740採用ASTM標準D257方法。
* 表面電阻率測量-放在平坦的表面，按下按鈕不放。LED顯示十進制歐姆/平方米測量值。
* 與地面電阻測量-接地連接器與大地連接，按下按鈕，讀數即為物體與地面間電阻。
* 獲CE認證。
規格
|
範圍:
|
10³-10¹²+ Ohms/平方米
|
|
解析度:
|
一個分度值
|
|
轉換點:
|
½ 十的對數刻度 (3.15 x
10n).
|
|
轉換點精確度:
|
+/- ½ 十進位.
|
|
精度:
|
+/- 10%. 再現性: +/- 5%
|
|
測試操作:
|
測試電池：手持時按下按鍵，紅色LED指示燈應該要亮
|
|
電池:
|
9V PP3 鹼性電池
|
|
尺寸重量:
|
130mm x 70mm x 35mm, 103g.
|
|
操作條件:
|
溫度 5° - 50°C. 相對溼度 0-90% (非冷凝)
|
The 740 Surface Resistance Checker is a
pocket-sized instrument providing fast and repeatable measurements of
conductive, static dissipative and insulative surfaces.
The 740 measures both surface resistivity and
resistance to ground.
•It uses the ASTM Standard D257 method of parallel
barsensing.
•For surface resistance, place the 740 on the flat
surface to be measured, press the button and hold. The LED that illuminates is
the decade measured in ohms/square.
•For resistance to ground measurement, insert the
ground ,cord connector into the metal socket on the right hand side of the
body. Then connect the crocodile clip to earth and, place the 740 on the
surface to be tested. Press the button—the reading is resistance to ground in
Ohms.
•Automatic ranging.
•Supplied with carrying case, battery and earth
lead.
•CE Certified.740 measures both surface
resistivity and resistance to ground.
Specification
|
Range:
|
10³-10¹²+ Ohms per Square.
|
|
Resolution:
|
One order of magnitude.
|
|
Changeover Point:
|
½ decade on logarithmic scale (3.15 x 10n).
|
|
Accuracy of changeover point:
|
+/- ½ decade.
|
|
Accuracy:
|
+/- 10%. Repeatability: +/- 5%
|
|
Test Operation:
|
Test battery - press button when holding in free
air- the red Insulative LED should illuminate.
|
|
Battery:
|
9V PP3 alkaline.
|
|
Size, Weight:
|
130mm x 70mm x 35mm, 103g.
|
|
Operating Conditions:
|
Temperature 5° - 50°C. Humidity 0-90% rH
(non-condensing).
|
