EN ISO 6940和6941測試廣泛應用於整個行業，尤其是在紡織和服裝製造行業，該行業被廣泛用於測試織物和其他機織材料產品。 該測試測量垂直定向樣品的火焰蔓延速率。
新型EN71-2玩具測試設備利用了現代技術，並在設計時考慮了人體工學，以確保測試盡可能的便於使用者使用。
標准設備符合EN ISO 6940和6941標準的強制性要求。
可以在設備上執行其他測試方法，例如BS 5867/5438系列測試，其中需要添加其他模板和樣品架。
規格與特點：
• 不銹鋼儀器底盤，帶有樣品架定位和滾輪組件
• 包括2個不銹鋼樣品架。 一種用於EN ISO 6940，一種用於EN ISO 6941
• 完全相容的燃燒器，帶指針控制閥
• 0°和30°角燃燒器支撐組件，“ Y”和“ Z”調整可精確定位燃燒器
• 包括標記線包450 m和雜物/滴水盤
• 包括用於40mm和25mm火焰調節的火焰高度墊片
• 包括水平表面點火火焰隔圈（0?）和邊緣點火火焰隔圈（30?）
• 控制面板上的單個按鈕可啟動/禁用氣體供應，確保輕鬆隔離系統
• 緊急停止按鈕，以扼殺氣體和動力，以確保最大的安全性
• 非常適合用於質量控制應用程序以及開發和分析新材料的工具
• 儀器也可以升級到EN ISO 13772測試
技術資料與需求：
電氣：110至230 volts – 5 Amps
環境溫度：工作溫度10°C 至 35°C
尺寸：500mm（W）x 820mm x（H）x 660mm（D）
氣體供應：測試中首選的燃氣是丙烷。 根據測試標準，丁烷或兩者的混合物均可接受。 獲得30°火焰穩定性所需的壓力必須在10 kPa和50 kPa之間。
請勿使用其他限制，因為這會降低流速。
The EN ISO 6940 and 6941 tests are extensively applied throughout industry, especially in the textile and apparel manufacturing industries, where it is widely used for the testing of fabrics and other woven material products. The test measures the rate of flame spread for vertically oriented samples.
This new EN71-2 Toy Testing Apparatus available from Concept Equipment utilises modern technology and has been designed with ergonomics in mind to ensure that testing is as user friendly as possible.
Standard equipment complies with the mandatory requirements of EN ISO 6940 and 6941 standards.
Other test methods can be performed on the apparatus, such as the BS 5867/5438 series of tests with the addition of additional templates and sample holders.
Specification and Features:
•Stainless steel instrument chassis with specimen holder location and thread roller assemblies
•2 off stainless steel specimen holders are included. One for EN ISO 6940 and one for EN ISO 6941
•Fully compliant burner complete with needle control valve
•0° and 30° angle burner support assembly with ‘Y’ and ‘Z’ adjustment for fine location of burner
•Marker thread pack 450 m and Debris/drip tray included
•Flame height spacer for 40 mm and 25 mm flame adjustment included
•Horizontal Surface ignition flame spacer (0?) and Edge Ignition flame spacer (30?) included
•A single push-button on the control panel activates/deactivates the gas supplies ensuring the system is isolated easily
•Emergency stop button to kill gas and power to ensure maximum safety
•Ideal for use in quality control applications as well as a tool for the development and analysis of new materials
•The instrument can also be upgraded for testing to EN ISO 13772
Technical Data and Requirements:
Electrical: 110 to 230 volts – 5 Amps
Ambient Temperature: Operating 10°C to 35°C
Dimensions: 500mm (W) x 820mm x (H) x 660mm (D)
Gas Supplies: The preferred fuel gas used in the test is propane. Butane or a mixture of both is acceptable according to the test standard. The pressure required to obtain flame stability at 30° needs to be between 10 kPa and 50 kPa.
No other restrictions should be used as this will reduce the flow rates.
