氧彈熱量計
EN ISO 1716
傳統的可移動氧彈和水桶設計以及該熱量計的水防護套使用戶可以完全控制燃燒過程。 這使得6200成為進行EN ISO 1716：2010測試時所需的精確研發和質量控制工作的最終選擇。
規格與功能
Isoperibol防護套系統
內建高容量泵驅動的循環水系統提供出色的熱保護套，該泵在桶的的側面和底部以及蓋子上保持連續的強制流動。均由熱量計控制器操作的密封浸入式加熱器和內建式熱交換器可提供精確的防護套溫度控制。
半自動充氧
為了加快和簡化氧彈的裝填操作，6200熱量計具有半自動系統，可為氧彈充氧。氧氣連接到熱量計中安裝的微處理器控制的螺線管。要填充氧彈，操作員只需將填充軟管連接器滑到氧彈入口閥上，然後按觸摸螢幕即可開始填充程序。
實驗室要求
熱量儀需要使用99.5％的氧氣和去離子水進行操作。如果選擇了循環系統，則水處理系統必須安裝在量熱儀的左側。
擴充系統
6220擴充系統包括以下組件：
•6200熱量計
•6510水處理系統
•1758印表機
•額外的氧彈和水桶
•6008氧彈維護套件
•6209B，1年服務套件
技術數據和要求
型號：6200
電氣：110至230 volt – 5 amps
環境溫度：工作溫度10°C至35°C
尺寸：570mm（W）x 430mm x（H）x 400mm（D）
每小時測試：6 – 8
每次測試的操作時間：6分鐘
精度等級：0.1％級
防護套類型：Isoperibol，水防護套
氧氣填充：半自動
桶填充：手動
氧彈清洗：手動
氧彈型號選項：1108，合金20、1108CL，合金G30、1108P，合金20，半永久線，1108PCL，合金G30，半永久線1109A，22mL半微型氧彈，1104（B），高強度氧彈。
平衡通訊：RS232C端口
印表機通訊：RS232C端口
網絡連接：通過乙太網路的TCP / IP
Bomb Calorimeter
EN ISO 1716
The traditional removable bomb and bucket design along with the water jacket of this calorimeter, afford the user with complete control over the combustion process. This makes the 6200 the ultimate choice for precise research and development and quality control work required when testing to EN ISO 1716:2010.
Specification & Features
Isoperibol Jacket System
Outstanding thermal jacketing is provided by a circulating water system driven by a built-in, high capacity pump which maintains a continuous forced flow around the sides and bottom of the bucket chamber and through the cover as well. A sealed immersion heater and a uilt-in heat exchanger, both operated by the calorimeter controller, provide precise jacket temperature control.
Semi-Automatic Oxygen Fill
To speed and simplify the bomb filling operation, the 6200 Calorimeter has a semiautomatic system for charging the bomb with oxygen. Oxygen is connected to a microprocessor controlled solenoid installed in the calorimeter. To fill the bomb, the operator simply slips the filling hose connector onto the bomb inlet valve and pushes the touch screen to start the filling sequence.
Laboratory Requirements
The calorimeter requires a source of 99.5% oxygen and deionized water for operation. If a closed loop system is chosen, the water handling system must be installed to the left of the calorimeter.
Expanded System
The 6220 Expanded System includes the following components:
•6200 Calorimeter
•6510 Water Handling System
•1758 Printer
•Extra Bomb and Bucket
•6008 Bomb Maintenance Kit
•6209B, 1 Year Service Kit
Technical Data & Requirements
Model Number: 6200
Electrical: 110 to 230 volts – 5 Amps
Ambient Temperature: Operating 10°C to 35°C
Dimensions: 570mm (W) x 430mm x (H) x 400mm (D)
Tests Per Hour: 6 – 8
Operation Time Per Test: 6 Minutes
Precision Classification: 0.1% Class
Jacket Type: Isoperibol, Water Jacket
Oxygen Fill: Semi-Automatic
Bucket Fill: Manual
Bomb Wash: Manual
Bomb Model Options: 1108, Alloy 20, 1108CL, Alloy G30, 1108P, Alloy 20, Semi-permanent Wire, 1108PCL, Alloy G30, Semipermanent Wire 1109A, 22mL Semi-micro Bomb, 1104(B), High Strength Bomb.
Balance Communication: RS232C Port
Printer Communication: RS232C Port
Network Connection: TCP/IP via Ethernet
