| DTMB -200 To DTMB-50K-L 張力測定器(數字型) DTMB-200 - 50K-L |
人氣指數 |
15206 |
|
 |
| 型號：DTMB -200 To DTMB-50K-L |
| 中文名稱：張力測定器(數字型) DTMB-200 - 50K-L |
| 英文名稱：Tesion Meters Hand-Held Electronic DTMB-200 - 50K-L |
| 廠牌：代理 |
| 供應商：大台北尖端儀器有限公司 |
| 定價：與我們聯絡 |
|
|
|
|
|
|
| 商 品 說 明 資 料 |
 |
DTMB系列：DTMB系列可以測量絲狀、線狀、帶狀以及寬幅物體的張力問題，廣泛應用於電線電纜、紡織化纖、金屬線、碳纖維、塑料薄膜、紙張、印刷產品、膠片、鋁箔等行業的通用張力儀，適用於大多數行業。可根據用途的不同提供專門設計的測量導輪。
DTMB是電子顯示儀表，精度高。DTMX系列更帶有輸出功能，可以與電腦連接，對測量過程進行記錄和曲線分析。
DTMB的測量範圍：10cN-500N
量程最小的是：0.1-200.0cN
量程最大的是：5.00-50.00daN
根據測量材料不同選擇各種不同導輪，例如測量膠卷的張力，可以用柱狀導輪。
大量程儀表帶有線徑補償器，消除由於被測材料直徑不同引起的誤差。
性能特點：
1. 微處理器控制獲得最高測量精度
2. 可靠的應變測量原理
3. 當張力波動時可通過選擇掃瞄速率(0.5-1-2或4秒),提供穩定的讀數(電子阻尼)
4. 測量頻率:62測量單位/秒
5. 在更新間隔t1之間,顯示器累計平均值
6. 具有最小值,最大值和峰值的記憶功能
7. 在張力儀多種測量場合允許進行零點調整,以保證最高的測量精度
8. 可根據客戶提供的材料進行兩種不同材料的標定
9. 內置材料線徑補償器,在型號-500cN和更高量程的張力儀中,提高變徑後的測量精度
10. 內建安裝孔可固定於線上使用
可選型號
|
型號 |
張力範圍
cN
|
測量頭寬度
毫米 |
應用於紡織行業
例如：紡織指數 |
校正材料***線纜行業
退火軟銅絲
|
應用於線纜行業
例如：軟煉銅絲
|
|
DTMB-200 |
0.1 - 200.0 |
65 |
max. 200 tex |
0.10毫米Ø |
max. 0.15 mm Ø |
|
DTMB-500 |
0.1 - 500.0 |
65 |
20 - 500 tex |
0.16+0.25毫米Ø |
0.05 - 0.25 mm Ø |
|
DTMB-1000 |
50 - 1000 |
65 |
50 - 1000 tex |
0.25+0.40毫米Ø |
0.10 - 0.40 mm Ø |
|
DTMB-2000 |
200 - 2000 |
65 |
300 - 2000tex |
0.40+0.60毫米Ø |
0.30 - 0.60 mm Ø |
|
DTMB-2500 |
250 - 2500 |
116 |
400 - 2500tex |
0.40+0.60毫米Ø |
0.30 -0.60 mm Ø |
|
DTMB-5000 |
500 - 5000 |
116 |
800 - 5000 tex |
0.60+1.00毫米Ø |
0.40 - 1.00 mm Ø |
|
DTMB-10K |
1.00 - 10.00daN |
116 |
1500 - 10000 tex |
0.70+1.20毫米Ø |
0.70 - 1.20 mm Ø |
|
DTMB-20K-L |
2.00 - 20.00daN |
216 |
2500 - 20000 tex |
鋼繩1.5毫米Ø
鋼繩2.0毫米Ø |
1.00 - 2.00 mm Ø |
|
DTMB-50K-L |
5.00 -50.00daN |
216
|
6000 - 50000 tex |
鋼繩2.0毫米Ø(7*7*0.25) |
1.80 - 2.20 mm Ø |
導向輪
V型槽
|
|
最大線速度 |
導向輪材質 |
|
標準 |
2000 |
硬化鋁（NØ.R10003） |
|
選項K |
3500 |
硬化鋁 |
|
選項H |
5000 |
等離子硬化鋁 |
|
選項T |
1000 |
黑塑料（PØM） |
|
選項W |
1000 |
鍍鎳鋼 |
|
選項ST |
1000 |
硬化鋼 |
|
選項B |
1000 |
調質鋼（應用於鋼簾線） |
|
選項CE |
1000 |
陶瓷 |
|
選項ASY
不對稱槽 |
1000 |
硬化鋁
不帶導線架 |
| 可選配件
選項L（標準量程2-20daN） |
|
 |
|
選項L |
省力槓桿（DTMB-20K和DTMB-50K標準配置） |
|
推薦型號DTMB-10K |
規格
|
精確度
其餘量程和不同於校正材料時 |
最佳量程（滿量程的10%-90%）的精度
±0.5%的滿量程或±1個刻度盤刻度
±3%的滿量程或±1個刻度盤刻度 |
|
過載量（約） |
15%的滿量程，無精度保證 |
|
過載保護 |
100% |
|
測量原理 |
應變測量電橋 |
|
測量輪偏差 |
最大0.2mm |
|
信號處理 |
數字式 |
|
測量頻率 |
62次/秒 |
|
顯示 |
4位LCD，12mm字高 |
|
刷新速度 |
0.5-1-2或4秒可選 |
|
|
最後，最小，最大，峰值 |
|
溫度範圍 |
10-45℃ |
|
空氣濕度 |
最大相對濕度85% |
|
電源 |
4*號AA電池1.5伏特（大約可持續使用20小時） |
|
外殼材料 |
模鑄鋁質 |
|
外殼尺寸 |
235*76*45(長*寬*高) |
|
淨重（毛重） |
型號-10K680g(1500g)
型號-20K-L及更高量程1000g(2200g) |
|
| |
9 Tension ranges from 0.1 - 200 cN to 5 - 50 daN
Electronic tension meter for applications in textile and wire industry. Versatile usable.
Applications in textile industry: e. g. 50 up to max. 50000 tex
Applications in wire industry: e. g. 0.08 up to 2.2 O mm copper wire
Basic unit for easy operation
Special Features
- Microprocessor controlled tension meter for highest accuracy
- Measuring principle: double beam in bending with strain gauge
- Selectable update rates (0.5, 1, 2 or 4 seconds) to provide
steady readings when tensions fluctuate (electronic damping)
- Measuring frequency: 62 measurements/second
- The display ot the tension meter shows averaged values calculated during the update
interval t1 e. g. every second 1 x
DIP switch for adjustment by operator
e. g. display update rate
- Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
- Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracy
- Calibration to customer supplied material is available (up to two different material calibrations)
- Tension meter with built-in material thickness compensator improves accuracy for changing diameters (from tension range - 500 cN)
- Hand-held unit with built-in mounting holes permit fixed installation for online use
|
|
| Easy mounting: For online application
Material thickness compensator: For better accuracy the
material to be measured or a similar material with the same
diameter should be inserted |
Standard Features
- Everything in operator’s view:
- the guide rollers
- the measured material
- the readings
- Filament guide and roller shifting mechanism ensure easy acquisition of the running material
- Ball-bearing mounted, V-grooved guide rollers
- Tension meter with rugged aluminium housing
- Battery operated (AC adapter for continuous operation available)
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Available Models
|
| Model |
Tension
Range
cN |
Resolution |
Measuring
Head Width*
mm |
Applications
textil industry
e.g yarn count |
Applications
wire industry
e.g. soft-annealed
Cu-wire |
| DTMB-200 |
0.1 - 200.0 |
0.1 cN |
65 |
max. 200 tex |
max. 0.15 mm O |
| DTMB-500 |
0.1 - 500.0 |
0.1 cN |
65 |
20 - 500 tex |
0.05 - 0.25 mm O |
| DTMB-1000 |
50 - 1000 |
1 cN |
65 |
10 - 1000 tex |
0.10 - 0.40 mm O |
| DTMB-2000 |
200 - 2000 |
1 cN |
65 |
300 - 2000 tex |
0.30 - 0.60 mm O |
| DTMB-2500 |
250 - 2500 |
1 cN |
116 |
400 - 2500 tex |
0.30 - 0.60 mm O |
| DTMB-5000 |
500 - 5000 |
1 cN |
116 |
800 - 5000 tex |
0.40 - 1.00 mm O |
| DTMB-10K |
1.00 - 10.00daN |
0.01 daN |
116 |
1500 - 10000 tex |
0.70 - 1.20 mm O |
| DTMB-20K-L |
2.00 - 20.00daN |
0.01 daN |
216
285** |
2500 - 20000 tex |
1.00 - 2.00 mm O |
| DTMB-50K-L |
5.00 - 50.00daN |
0.01 daN |
216
285** |
6000 - 50000 tex |
1.80 - 2.20 mm O |
Specifications
|
| Calibration: |
According to SCHMIDT factory procedure |
| Accuracy: |
From 10 % up to 90 % of tension range:
±0.5 % full scale and ±1 digit
remaining tension range and other calibration materials:
±3 % full scale und ±1 digit |
| Overrange: |
Approx. 15 % full scale, without accuracy guarantee |
| Overload protection: |
100 % of tension range |
| Measuring principle: |
Strain gauge bridge |
| Measuring roller deflection: |
Max. 0.2 mm |
| Signal processing: |
Digital |
| Measuring frequency: |
62 measurements/s |
| Converter: |
12 bit A / D |
| Temperature coefficient: |
Gain: less than ±0.01 % full scale/oC
Zero point: less than ±0.3 % full scale/oC |
| Display: |
LCD 4 digit, 12 mm high |
| Display update time: |
Adjustable 0.5, 1, 2 or 4 s (averanging) |
| Field adjustment: |
±7 steps in 1.5 % increments |
| Memory: |
MIN, MAX, PEAK and last value |
| Temperature range: |
10 - 45 oC |
| Air humidity: |
85 % RH, max |
| Power supply: |
4 Batteries 1.5 V, size AA (approx. 20 h continuous use) |
| Auto power off: |
After two minutes of non-use |
| Housing material: |
Die-cast aluminium |
| Housing dimensions: |
235 x 76 x 45mm (LxWxH) |
| Weight, net (gross): |
Up to model DTMB-10K approx. 680 g (approx. 1500 g)
From model DTMB-20K-L approx. 1000 g (approx. 2200 g) | |
| |
| 商 品 其 它 備 註 |
 |
|
|
|
|
