張力計(數字型) DTEB-200 To DTEX-2000→特價中...--大台北尖端儀器有限公司--ABTEK Corp.

型號

張力範圍

cN

測量頭寬

mm

校正材料

DTEB-200，DTEX-200

2-200

38

PA： 0.12毫米O

DTEB-500，DTEX-500

5-500

38

PA： 0.20毫米O

DTEB-1000，DTEX-1000

50-1000

38

PA： 0.30毫米O

DTEB-2000，DTEX-2000

200-2000

38

PA： 0.50毫米O

導向輪

最大線速度

導向輪材質

標準

900

硬化鋁（No.R10010）

選項K

2000

硬化鋁

選項T

450

黑塑料（POM）

選項W

450

鍍鎳鋼

配件

選項L（標準量程2-20daN）

選項L

省力槓桿（DTEB-20K和DTEB-50K標準配置）

推薦型號DTEB-10K

規格

精確度

其餘量程和不同於校正材料時

最佳量程（滿量程的10%-90%）的精度

±0.5%的滿量程或±1個刻度盤刻度

±3%的滿量程或±1個刻度盤刻度

過載量（約）

15%的滿量程，無精度保證

過載保護

100%

測量原理

應變測量電橋

測量輪偏差

最大0.2mm

信號處理

數字式

測量頻率

62次/秒

顯示

4位LCD，12mm字高

刷新速度

0.5-1-2或4秒可選

最後，最小，最大，峰值

溫度範圍

10-45℃

空氣濕度

最大相對濕度85%

電源

4*號AA電池1.5伏特（大約可持續使用20小時）

外殼材料

模鑄鋁質

外殼尺寸

235*76*45(長*寬*高)

淨重（毛重）

型號-10K680g(1500g)

型號-20K-L及更高量程1000g(2200g)

型號DTEX的額外規格

擴充記憶體

最大100筆讀值, 最大, 最小和峰值以及平均和標準誤差值

數據輸出信號

RS 232 C (4800, 8, N, 2)

類比輸出信號

0 - 1 V DC (轉換率 16 ms)

數字化運算

Mitutoyo

4 Tension ranges from 2 - 200 cN to 200 - 2000 cN

Special tension meter with small measuring head, where access space is limited or where filaments run close together

Tension meter for limited access space

Tension meter with turned-up finger edges for easy thread

Special Features

Turned-up outer finger edges guide the running filament into the roller grooves
Length of measuring head approx. 59 mm
Hand-held unit with small, V-grooved guide rollers, ball-bearing mounted
Tension meter model DTEX is calibrated using only PA monofilament!
Calibration to customer supplied material is available
The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator

Standard Features

Everything in operator’s view:
- the guide rollers
- the measured material
- the readings
Roller shifting mechanism ensure easy acquisition of the running material
Ball-bearing mounted, V-grooved guide rollers
Tension meter with rugged aluminium housing
Battery operated (AC adapter for continuous operation available)
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model	Model	Tension Range cN	Resolution	Measuring Head Width* mm	SCHMIDT Calibration Material PA**
DTEB-200	DTEX-200	2.0 - 200.0	0.1 cN	38	PA: 0.12 mm O
DTEB-500	DTEX-500	5.0 - 500.0	0.1 cN	38	PA: 0.20 mm O
DTEB-1000	DTEX-1000	50 - 1000	1 cN	38	PA: 0.30 mm O
DTEB-2000	DTEX-2000	200 - 2000	1 cN	38	PA: 0.50 mm O

Specifications

	Model DTEB:
Calibration:	According to SCHMIDT factory procedure
Accuracy:	From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension range and other calibration material: ± 3% full scale and ±1 digit
Overrange:	Approx. 15 % full scale, without accuracy guarantee
Overload protection:	100 % of tension range
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	0.2 mm max.
Signal processing:	Digital
Measuring frequency:	62 Measurement/s
Converter:	12 bit A/D
Temperature coefficient:	Gain: less than ±0.01 % full scale/oC Zero point: less than ±0.3 % full scale/oC
Display:	LCD 4 digit, 12 mm high
Display update rate:	Adjustable 0.5, 1, 2 or 4 s (averaging)
Field adjustment:	±7 steps in 1.5 % increment
Memory:	MIN, MAX, PEAK and last value
Temperature range:	10 - 45 oC
Air humidity:	85 % RH, max.
Power supply:	4 Batteries 1.5 V, size AA (approx. 20 h continuous use)
Auto power off:	After 2 minutes of non-use
Housing material:	Die-cast aluminium
Housing dimensions:	235 x 76 x 45mm (LxWxH)
Weight, net (gross):	Approx. 680 g (approx. 1500 g)
Expanded memory:	Additional specifications of model DTEX: Max. 100 readings, MAX, MIN and PEAK values as well as average and standard deviation
Digital output signal:	RS 232 C (4800, 8, N, 2)
Analog output signal:	0 - 1 V DC (converter rate 16 ms)
Digimatic interface:	Mitutoyo

商品其它備註