相關標準
日本工業標準 JIS L 1094 紡織品及針織品的帶電性試驗方法
中國國家標準 GB/T 12703 紡織品靜電測試方法
用途/長處
本機是依據日本工業標準JIS L 1094「紡織品及針織品的帶電性試驗方法」的「B法」所製造的「摩擦帶電壓測定器」。使試驗片旋轉的同時於摩擦布相摩擦，測定出發生的帶電壓。
本機由安裝上試驗片並使之旋轉的旋轉圓筒，通過試驗片和摩擦布（JIS L 0803摩擦用白布）進行摩擦使靜電發生的摩擦部，能檢測出發生靜電的受電部，測定指示部（放大器）等部分構成。
可同「示波器」「記錄器」等別賣品連接使用。
樣式
| RST-400 |
| 帶電壓測定範圍 |
∼９９９９Ｖ |
| 最小讀取值 |
１Ｖ |
Reference standard
JIS L 1094、GB/T 12703 standards
Use/Good point
This is “Friction-charged electrostatic potential measuring apparatus” based on “Friction-charged electrostatic potential measuring method of JIS L1094” which is the method to measure the electrostatic potential generated by friction of rubbing cloth while rotating the test piece.
This apparatus is used for evaluating the electric charging property of textile, film, plastic products, etc. by static electricity.
It measured the charging voltage after 60seconds from the starting of friction by rubbing clamped on the rotary drum with friction cloth.
As optional device, “Recorder” and “Oscilloscope” can be connected to the apparatus.
Spec
| |
RST-400 |
| Size of test piece |
50×80㎜ approx. |
| Size of rubbing cloth |
40×150㎜ approx. |
| Measuring range |
0∼9,999V |
| Min. reading |
1V |
| Indication of measurement |
LED indicator & print out |
| Timer |
LED digital timer |
| Drum rotating speed |
400r.p.m. approx. |
| Tension load of rubbing cloth |
4.9N |
| Printer |
Micro thermal printer |
| Power source |
AC100V 50/60Hz |
| Dimensions (Rotary drum section) |
W540×D340×H380㎜ approx. |
| Dimensions (Control Panel section) |
W400×D320×H250㎜ approx. |
| Weight (Rotary drum section) |
40㎏ approx. |
| Weight (Control Panel section) |
20㎏ approx. |
