Durometer according to Shore for determining the surface hardness of soft rubber, elastomers, natural rubber, polyester, soft PVC, leather, etc.
Shore Ahardness testeraccording DIN 53505, ISO 7619, ISO 868 and ASTM D 2240
Durometer with large seating for accurate measuring
Special Features
The spring loaded outer ring assures a constant measuring pressure and eliminates false readings due to difference between operators
Flat bottom prevent tilting and improves the measuring accuracy
Working face 18 mm Ø
Adjustable Min./Max. indicator marks to highlight the working range of the hardness tester
Optionally available: Calibration certificate with calibration report
Standard Features
Easy to use
High repeatability
Application range 10 - 90 Shore A units
Certificate of Compliance with the order 2.1 according EN 10204 is included
Operation
For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.
General: The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
Available Models
Model
Shore
Application
HPSA
Shore A
soft rubber, elastomers, natural rubber, soft PVC, leather, etc.
alternative
HPSA-R..-M
Shore A
rubber coated rollers, rollers, and cots
HPSD
Shore D
plastic and medium hard to hard rubber materials
HPSB
Shore B
for harder material than Shore A
HPSC
Shore C
medium hard rubber, elastomers and plastic
HPSDO
Shore DO
plastic and medium hard to hard rubber materials
HPS0
Shore O
soft elastomers, soft elastic materials, medium fast textiles
HPSAO
Shore AO
Foams, steering wheels and inner linings of motor vehicles
Specifications
Indentor:
Cone 35°,
1.25 mm Ø
Depth of indentation:
0 - 2.5 mm
Typical applications:
Soft rubber, elastomers, natural rubber, soft PVC, leather, etc.
Accuracy:
± 1 hardness unit
Application range:
10 - 90 Shore A
Standard:
DIN 53505, ISO 7619, ISO 868, ASTM D 2240
Measuring spring force:
0.55 - 8.065 N
Test pressure*:
Approx. 12.5 N
Scale diameter:
54 mm
Display range:
0 - 100 Shore A units
Working face:
18 mm Ø = 2.5 cm²
Base plate:
44.5 mm Ø
Weight, net (gross):
Approx. 300 g (500 g)
Dimensions:
50 x 60 x 110 mm (LxWxH)
商 品 其 它 備 註
大台北尖端儀器有限公司
ABTEK CORP.
10442 台北市中山區長安東路一段42號7F
7F., No.42, Sec. 1, Chang -An E. Rd., Zhongshan Dist., Taipei City 104, Taiwan (R.O.C.)