DTFB-200 To DTFX-1000 電子式張力計(光纖碳纖用) DTFB-200 To DTFX-1000 |
人氣指數 |
10956 |
|
|
型號:DTFB-200 To DTFX-1000 |
中文名稱:電子式張力計(光纖碳纖用) DTFB-200 To DTFX-1000 |
英文名稱:Tension Meter for optical fibres, carbon fibres, Model:DTFB-200 To DTFX-1000 |
廠牌:代理 |
供應商:大台北尖端儀器有限公司 |
定價:與我們聯絡 |
|
|
|
|
商 品 說 明 資 料 |
|
DTFB採超大引導輪設計降低張力測量中對光纖、碳纖維、工業纖維敏感材料的偏差。測量光纖等敏感材料需要使用大直徑寬輪距的張力計。
性能特點 :
1. 配有滾珠軸承,32mm直徑的V型槽導輪
2. 超大曲率半徑確保輕柔的處理被測敏感材料
3. 測量支架上的特殊引導設計保證測量材質輕鬆導入
4. 校正材料為聚酰胺單根長絲
5. 設計是依照DTMB,DTMX的款式,但沒有材料厚度補償器
特性
l 一切盡收眼底
導向輪
測量材料
讀數
l 導線架和導向輪移動裝置確保運行中材料易於導入
l 帶有球軸承的V型導向輪
l 防滑鋁外殼
l 電池供電
l CE認證(電磁適應性試驗)
l 對電子放電所產生的衝擊和損害具有防護功能
l 附有標準報告的測試報告
型號 |
張力範圍
cN |
解析度 |
測量頭寬度
約 毫米 |
校正材料 ** |
DTFB-200,DTFX-200 |
2-200 |
0.1 cN |
140 |
PA: 0.12毫米O |
DTFB-500,DTFX-500 |
5-500 |
0.1 cN |
140 |
PA: 0.20毫米O |
DTFB-1000,DTFX-1000 |
50-1000 |
1 cN |
140 |
PA: 0.30毫米O |
|
最大線速度
米/分鐘 |
導向輪材質 |
標準 |
4000 |
硬化鋁(No.R120210) |
選項T |
4000 |
紅塑料
(導線輪尺寸與標準輪相同) |
精確度
其餘量程和不同於標定材料時 |
最佳量程(滿量程的10%-90%)的精度
±0.5%的滿量程或±1個刻度
±3%的滿量程或±1個刻度 |
過載量(約) |
15%的滿量程,無精度保證 |
過載保護 |
100% |
測量原理 |
應變測量電橋 |
測量輪偏差 |
最大0.2mm |
信號處理 |
數字式 |
測量頻率 |
62次/秒 |
顯示 |
4位LCD,12mm字高 |
刷新速度 |
0.5-1-2或4秒可選 |
|
最後,最小,最大,峰值 |
溫度範圍 |
10-45℃ |
空氣濕度 |
最大相對濕度85% |
電源 |
4*號AA電池1.5伏特(大約可持續使用20小時) |
外殼材料 |
模鑄鋁質 |
外殼尺寸 |
235*76*45(長*寬*高) |
淨重(毛重) |
型號-10K680g(1500g)
型號-20K-L及更高量程1000g(2200g) |
DTFX的額外規格 |
擴充的記憶體: |
最多100 讀值,最大,最小,和峰值以及平均值和標準誤差 |
數位輸出信號: |
RS 232 C (4800, 8, N, 2) |
類比輸出信號: |
0-1 V DC (轉換率 16 ms) |
數位介面: |
Mitutoyo | |
|
3 Tension ranges from 2 - 200 cN to 50 - 1000 cN
Special tension meter for sensitive materials as optical fibres, carbon fibres, technical fibres etc.
Hand-held unit with large guide rollers (32 mm groove diameter) to minimize material deflection
Tension meter with special guides on the bracket assembly for easy thread
Special Features
- Large, V-grooved guide rollers with 32 mm groove diameter, ball-bearing mounted
- Large bending radius assures gentle handling of the material being measured
- Special guides on the bracket assembly permit easy material acquisition
- Tension meter model DTFX is calibrated using only PA monofilament!
- The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator
For additional Information, see model DTMB and DTMX
Standard Features
- Everything in operator’s view:
- the guide rollers - the measured material - the readings
- Filament guide and roller shifting mechanism ensure easy acquisition of the running material
- V-grooved guide rollers, ball-bearing mounted
- Tension meter with rugged aluminium housing
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally availlable: Inspection Certificate 3.1 according EN 10204 with calibration report
Available Models
Model |
Model |
Tension Range cN |
Resolution |
Measuring Head Width mm |
SCHMIDT Calibration Material PA** |
DTFB-200 |
DTFX-200 |
2.0 - 200.0 |
0.1 cN |
140 |
PA: 0.12 mm Ø |
DTFB-500 |
DTFX-500 |
5.0 - 500.0 |
0.1 cN |
140 |
PA: 0.20 mm Ø |
DTFB-1000 |
DTFX-1000 |
50 - 1000 |
1 cN |
140 |
PA: 0.30 mm Ø |
Guide Rollers |
Order-Code |
|
Roller Material | |
Standard |
4000 |
Hardcoated aluminium |
Code T |
4000 |
Plastic (PVC) red |
Specifications
|
Model DTFB:
|
Calibration: |
According to SCHMIDT factory procedure |
Accuracy: |
From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension ranges and other calibration material: ±3 % full scale and ±1 digit |
Overrange: |
Approx. 15 % full scale, without accuracy guarantee |
Overload protection: |
100 % of tension range |
Measuring principle: |
Strain gauge bridge |
Measuring roller deflection: |
0.2 mm max. |
Signal processing: |
Digital |
Measuring frequency: |
62 Messungen/s |
Converter: |
12 bit A/D |
Temperature coefficient: |
Gain: less than ±0.01 % full scale/ºC Zero point: less than ±0.3 % full scale/ºC |
Display: |
LCD 4 digit, 12 mm high |
Display update time: |
Adjustable 0.5, 1, 2 oder 4 s (averaging) |
Field adjustment: |
±7 steps in 1.5 % increment |
Memory: |
MIN, MAX, PEAK and last value |
Temperature range: |
10 - 45 ºC |
Air humidity: |
85 % RH, max. |
Power supply: |
4 Batteries 1.5 V, size AA (approx. 20 h continuous use) |
Auto power off: |
After 2 min of non-use |
Housing material: |
Die-cast aluminium |
Housing dimensions: |
235 x 76 x 45mm (LxWxH) |
Weight, net (gross): |
Approx. 680 g (approx. 1500 g) |
Expanded memory:
|
Additonal specifications model DTFX: Max. 100 readings, MAX, MIN, and PEAK as well as average values and standard deviation
|
Digital output signal: |
RS 232 C (4800, 8, N, 2) |
Analog output signal: |
0 - 1 V DC (converter rate 16 ms) |
Digimatic interface: |
Mitutoyo | |
|
商 品 其 它 備 註 |
|
|
|
|
|