DTLB-2000 To DTLX-10K 電子式張力計(光纖電纜緩衝管用) DTLB-2000 To DTLX-10K |
人氣指數 |
12993 |
|
|
型號:DTLB-2000 To DTLX-10K |
中文名稱:電子式張力計(光纖電纜緩衝管用) DTLB-2000 To DTLX-10K |
英文名稱:Tension Meter for fibre optic cables and buffer tubes No.DTLB-2000 To DTLX-10K |
廠牌:代理 |
供應商:大台北尖端儀器有限公司 |
定價:與我們聯絡 |
|
|
|
|
商 品 說 明 資 料 |
|
特製的張力計用於敏感材料如光纖電纜緩衝管,直徑可達8mm Ø
手持裝置超大引導輪(導槽直徑29.5mm)設計降低張力測量中材料的彎曲變形
張力計有特製的導輪和支架組便於穿線
性能特點:
1. 大型直徑29.5mm的V型槽或U型槽導輪,配有滾珠軸承
2. 超大曲率半徑保證對被測敏感材料的保護性測量
3. 測量支架上的特殊引導設計保證測量材質輕鬆導入
4. 設計是依照DTMB,DTMX的款式,但沒有材料厚度補償器
其他資料請參照型號DTMB, DTMX
特性
l 一切盡收眼底
導向輪
測量材料
讀數
l 導線架和導向輪移動裝置確保運動材料易於導入
l 帶有球軸承的V型導向輪
l 防滑鋁外殼
l 電池供電
l CE認證(電磁適應性試驗)
l 對電子放電所產生的衝擊和損害具有防護功能
l 可選:依照EN 10204規範的檢驗證明和校正報告
可選型號
型號 |
測量範圍(cN) |
解析度 |
測量頭寬度(mm) |
校正材料 |
DTLB-2000/DTLX-2000 |
200-2000 |
1 cN |
185 |
Customer sample only |
DTLB-5000/DTLX-5000 |
400-5000 |
1 cN |
235 |
Customer sample only |
DTLB-10K/ DTLX-10K |
1-10daN |
0.01 daN |
235 |
Customer sample only |
可選擇其他的測量單位,例如:g 測量頭的寬度為兩個引導輪的外沿間距 滿足95%的應用範圍PA=聚酰胺單絲
導向輪
V型槽 |
最大線速度m/min max |
導輪材質 |
標準 |
4000 |
硬化鐵 |
(No R10006) |
U型槽 |
|
|
代碼R1 |
4000 |
硬化鐵 |
(radius R 5) |
配件
Code L 省力壓桿 建議張力範圍 10 daN及更大時選用以降低擴展外面導輪時所需施力
規格
精確度
其餘量程和不同於校正材料時 |
最佳量程(滿量程的10%-90%)的精度
±0.5%的滿量程或±1個刻度
±3%的滿量程或±1個刻度 |
過載量(約) |
15%的滿量程,無精度保證 |
過載保護 |
100% |
測量原理 |
應變測量電橋 |
測量輪偏差 |
最大0.2mm |
信號處理 |
數字式 |
測量頻率 |
62次/秒 |
轉換率 |
12位元 A/D |
溫度補償 |
增益: 少於 ±0.01 % 滿量程/ºC 零點:少於 ±0.3 % 滿量程/ºC |
顯示 |
4位LCD,12mm字高 |
刷新速度 |
0.5-1-2或4秒可選(平均) |
範圍調整 |
在 1.5 % 增量的 ±7刻度 |
記憶 |
最後,最小,最大,峰值 |
溫度範圍 |
10-45℃ |
空氣濕度 |
最大相對濕度85% |
電源 |
4*號AA電池1.5伏特(大約可持續使用20小時) |
外殼材料 |
模鑄鋁質 |
外殼尺寸 |
235*76*45mm(長*寬*高) |
淨重(毛重) |
型號-10K 680g(1500g) |
DTLX的額外規格 |
擴充的記憶體: |
最多100 讀值,最大,最小,和峰值以及平均值和標準誤差 |
數位輸出信號: |
RS 232 C (4800, 8, N, 2) |
類比輸出信號: |
0-1 V DC (轉換率 16 ms) |
數位介面: |
Mitutoyo |
|
|
3 Tension ranges from 200 - 2000 cN to 1 - 10 daN
Special tension meter for sensitive materials as fibre optic cables and buffer tubes up to 8 mm Ø max.
Hand-held unit with large guide rollers (29.5 mm groove diameter) for minimized material deflection
Tension meter with special guides on the bracket assembly for easy thread
Special Features
- Large, V- or U-grooved guide rollers with 29.5 mm groove diameter, ball-bearing mounted
- Large bending radius assures gentle handling of the material being measured
- Special guides on the bracket assembly permit easy material acquisition
- The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator
For additional Information, see model DTMB and DTMX
Standard Features
- Everything in operator`s view:
- the guide rollers - the measured material - the readings
- Filament guide and roller shifting mechanism ensures easy acquisition of the running material
- V-grooved guide rollers, ball-bearing mounted
- Tension meter with rugged aluminium housing
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Available Models
Model |
Model |
Tension Range cN |
Resolution |
Measuring Head Width* mm |
SCHMIDT Calibration Material |
DTLB-2000 |
DTLX-2000 |
200 - 2000 |
1 cN |
185 |
customer sample only |
DTLB-5000 |
DTLX-5000 |
400 - 5000 |
1 cN |
235 |
customer sample only |
DTLB-10K |
DTLX-10K |
1 - 10 daN |
0.01 daN |
235 |
customer sample only |
Guide Rollers |
Order-Code |
|
Roller Material | |
Standard |
4000 |
hardened steel |
Code R1 |
4000 |
hardened steel (radius R5) |
Attachment
Specifications
|
Model DTLB:
|
Calibration: |
According to SCHMIDT factory procedure |
Accuracy: |
From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension ranges and other calibration material: ±3 % full scale and ±1 digit |
Overrange: |
Approx. 15 % full scale, without accuracy guarantee |
Overload protection: |
100 % of tension range |
Measuring principle: |
Strain gauge bridge |
Measuring roller deflection: |
0.2 mm max. |
Signal processing: |
Digital |
Measuring frequency: |
62 Messungen/s |
Converter: |
12 bit A/D |
Temperature coefficient: |
Gain: less than ±0.01 % full scale/ºC Zero point: less than ±0.3 % full scale/ºC |
Display: |
LCD 4 digit, 12 mm high |
Display update time: |
Adjustable 0.5, 1, 2 oder 4 s (averaging) |
Field adjustment: |
±7 steps in 1.5 % increment |
Memory: |
MIN, MAX, PEAK and last value |
Temperature range: |
10 - 45 ºC |
Air humidity: |
85 % RH, max. |
Power supply: |
4 Batteries 1.5 V, size AA (approx. 20 h continuous use) |
Auto power off: |
After 2 min of non-use |
Housing material: |
Die-cast aluminium |
Housing dimensions: |
235 x 76 x 45mm (LxWxH) |
Weight, net (gross): |
Approx. 680 g (approx. 1500 g) |
Expanded memory:
|
Additonal specifications model DTLX:
Max. 100 readings, MAX, MIN, and PEAK as well as average values and standard deviation
|
Digital output signal: |
RS 232 C (4800, 8, N, 2) |
Analog output signal: |
0 - 1 V DC (converter rate 16 ms) |
Digimatic interface: |
Mitutoyo | |
|
商 品 其 它 備 註 |
|
|
|
|
|