造紙機手持捲筒紙張力測量 - 滑動版 – 尤其是在高速時
在造紙機中用於測量篩網，毛氈，成型織物，覆蓋物等特別是機器速度超過1000米/分鐘
特殊陶瓷塗層的摩擦最小
提供2個額定負載範圍：
0至20kN / m
0到100pli
產品說明
這些感測器設計精巧，可在造紙機蓋（如毛氈和篩網以及織物和織物）上進行精確，高度可再現的線上張力測量。
特殊的工程設計不僅可以測量靜態和動態線張力，還可以分析幅材長度和寬度的張力曲線。
毛氈張力的交叉輪廓
毛氈張力的縱向輪廓
關於線上張力曲線的信息通常具有重要意義。它在許多生產過程中對產品的質量和均勻性產生重大影響，分別對覆蓋物的生命週期產生影響。
及早發現機器問題可將故障和非生產性停機時間降至最低。
透過非常快速和明確地調整任何特定產品的工作張力，縮短了更換產品的時間。
透過設定最佳張力來增加乾含量。
對於未經訓練的用戶而言，“手持穩定器”功能有助於在很大程度上實現精確的測量結果，而與材料的自然剛性無關。
感測器的可移位手柄透過彈簧預加應力到限定的力。
測量時將感測器向下壓在材料上，直到手柄移動到上部和下部止動件之間的位置。
現在即達到了測量所需的壓力。
特點：
-
陶瓷塗層滑動板的摩擦最小
-
不受材料或線上速度的影響
-
特別是在高材料速度下
-
感測器輕輕按壓在材料上
-
確定壓力的手持穩定器 - 獨立於用戶
-
即使在處理線上張力的高頻信號時也具有最大靈敏度
-
即使在高速時也不會產生共振的傾向
-
防潑水/不銹鋼
-
堅固耐用 - 有效的過載保護
-
用戶操作的高可用性
-
提供有關線張力的快速，可重複的信息
額定測量範圍：
選配：
136.2 SH - 單手設計特殊版本作為單手儀器：
•放大器DIGITENS固定在感測器上
測量放大器Digitens®485SH
• 手持式
• 尤其是 用於感測器136.2 SH
• 數字顯示
• 自動歸零/保持/峰值
數據採集軟體HCC-EASY
• 測量
• 存儲
• 分析
配件：
手提箱•堅固的設計
Web tension sensor 136.2 SH Slider
Handheld web tension measurement at papermaking machines - sliding version -
especially at high speeds
• for measuring sieves, felts, forming fabrics, coverings etc.
in papermaking machines
• especially for machine speeds exceeding 1000m/min
• minimal friction by special ceramic coating
• available in 2 rated load ranges:
0 to 20kN/m
0 to 100pli
These sensors are of a sophisticated design for exact, highly reproducible line tension measurements at papermaking machine covers such as felts and sieves as well as fabrics and weaves.
The special engineering design makes it possible to measure not only static and dynamic line tension, but also to analyze the tension curves across the length and breadth of the web.
cross profile of a felt tension
longitudinal profile of a felt tension
Information on the line tension profile is often of great significance. It exerts in many production processes a major influence on the quality and the uniformity of the product, respectively on the life cycle of the covering.
Early detection of problems at the machines reduce failure and unproductive downtime to a minimum.
The time to change the product is shortened by very quick and defined adjustment of the working tension typical for any particular product.
The dry content is increased by setting the optimum tension.
|
|
The "handling constanter" facilitates - also for untrained users - to realise exact measuring results, in a high degree independent of the natural rigidity of the material.
The shiftable hand grip of the sensor is pre-stressed to a defined force by means of springs.
For measurement the sensor is pressed down against the material until the hand grip moves to a position between the upper and the lower stop.
The pressing force - necessary for measurement - is reached now.
|
|
• minimum friction by ceramic coated sliding plate
• no influence on the measurement by the material or the speed of the line
• especially at high material speeds
• sensor is pressed slightly on the material
• handling constanter for defined pressing force - independent of the user
• maximum sensitivity even when dealing with high frequency signals of line tension
• no tendency to resonate even at high speeds
• splash-proof / stainless
• rugged - effective overload protection
• high availability for customer operations
• delivers fast, reproducible information about the line tension
|
|
Type
|
Nominal force [kN/m]
|
The measuring range of the sensor begins at force’s zero point. |
2-hand operation
1-Hand Operation
