These thickness gauges are especially handy for measuring thickness of small parts, metal,
rubber, vinyl, paper, foil and other sheet material. |
 |
The objects to be measured is clamped by simple lever operation.
The measured values are read directly on the dial gauge. |
|
Since the anvil and the contact point are adjusted for parallelism, accurate measured values
are obtained. |
|
 Dial Thickness Gauges 0.01mm type |
| Model |
G |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
 Ø10mm flat contact point and
anvil (ceramic)
 |
| Model |
G-1A |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
Ø5mm flat contact point and
anvil (metal)
 |
| Model |
G-1M |
| Graduation |
0.01mm |
| Range |
0- 10mm |
Ø6mm flat contact point and
anvil (metal)
The frame on the anvil side
is cut, which facilitates
measurement in a narrow place.
|
| Model |
G-2 |
| Graduation |
0.01mm |
| Range |
0 - 20mm |
Ø10mm flat contact point and
anvil (ceramic)
 |
| Model |
G-3 |
| Graduation |
0.01mm |
| Range |
30mm (Anvil 20mm) |
Ø10mm flat contact point and
anvil (ceramic)
Anvil side is adjustable
 |
| Model |
G-4 |
| Graduation |
0.01mm |
| Range |
65mm (Anvil 55mm) |
Spherical contact point
Anvil side is adjustable
|
| Model |
H |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
Ø10mm flat contact point and anvil (ceramic)
 |
| Model |
H-1A |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
Ø5mm flat contact point and anvil (metal)
 |
|
| Model |
H-2 |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
Spherical contact point and anvil
 |
|
| Model |
H-3 |
| Graduation |
0.01mm |
| Range |
0 - 10mm |
Spherical contact point and roller type anvil
 |
|
 |
A PAPER GAUGE "PG-10" is a Thickness gauge to the
Measurement of Paper and similar objects. |
| Model |
PG-10 |
( Paper Gauge ) |
| Graduation |
0.01mm |
|
| Range |
0 - 10mm |
|
Thickness Gauge to the Measurement of Paper
and Similar objects.
The gauge is calibrated in 0.01mm or 10 micron.
 |
Portable size! Excellent usability!
The SK material is used for the
parts holding paper in between
|
The gauge graduation is represented in
millimeter and micron. |
|
Contact Point and Anvil parts available in
special geometry at request. |
|
|
.jpg)
